Pico-Clasp wire-to-board connectors
A net set of 1.00mm pitch wire-to-board Pico-Clasp Connectors is available from this vendor. The connectors offer a variety of mat- ing styles and orientations, plated in either tin or gold to meet flexible design specifics. The Connectors are ideal for customers in the consumer, industrial, automotive, and medical industries. The new connectors range in circuit size options, from 2 to 50, in single- and dual-row configurations. Wide header versions make them ideal for compact
applications. Thick gold plating provides se- curity that the connectors will remain reliable and intact even in harsh weather conditions. The Pico-Clasp Connectors have an easy- to-mate outer positive lock, combined with both a space-saving inner friction lock and a positive inner lock that prevents wire tangling and latch breakage. The 1.00mm pitch is one of the smallest on the market for positive lock wire-to-board crimp systems and offers a 1.0A current rating.
Molex
FIND MORE INFORMATION ABOUT THESE PRODUCTS AT
EVALUATIONENGINEERING.COM/CATEGORY/EE-TECHFOCUS
DVT Solutions, LLC
Turnkey 0402 Package Test System with 40Ghz TRL/LRL Calibration and DUT Boards
Solderless board launch connector and test boards
Compared to current vertical mount con- nectors on the market, this vendor’s new TLF40-002 connector has the same footprint and mounting configuration as the current industry standard connectors. A simple-to- design board-level transition is all that is required to achieve performance equal to that which before could only be achieved by edge launch connectors. Instead of a 360-de- gree coaxial launch interface to the PCB— which requires complicated, hard to design and fabricate via structures—a simple via structure on the top layer of the board is all that is required. Transitions can be made to microstrip or grounded coplanar waveguide GCPW transmission lines. Compared to cur- rent edge launch connectors, the test boards show similar performance to edge launch connectors. The designs are simpler as well. The big advantage is in PDB fabrication, as the tolerance issues of board fabrication dealing with tolerances referenced from the edge of a board go away. Test pads can be designed into the boards for future use, and the same set of connectors can be used and re-used for measuring different boards.
Signal Microwave
This kit provides a total test fixture solution by providing both the TRL/LRL calibration board to calibrate the VNA to remove the connec- tors and 4 inches of the PCB trace from the measurement. Each test fixture contains 2.92mm connectors on each end and a solder point for the SMD component for accurate measurements.
TRL/LRL Calibration Board Sales & Support
DVT Solutions, LLC Brian Shumaker
sales@gigaprobes.com
Visit our website for details
www.signalmicrowave FRP • 480-322-4992 Copyright © 2018 Signal Microwave, LLC
JANUARY 2019
EVALUATIONENGINEERING.COM 25
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32